Congratulations
for Your New Haas Machine!
Please review all of the below information to ensure a successful start-up of your new machine.


We are dedicated exclusively to Haas machine tools. We have a single focus and mission, and anything we can do to make sure you are completely satisfied with your new machine purchase is well worth our time and effort. Thank you for choosing Haas to fulfill your manufacturing requirements and provide you with customer-focused service and support.
-Terrence Miranda, Managing Director
Below is a little bit about

Our Pune Office – India
Life at Phillips
HFO India – A Division of Phillips
We proudly serve in 12 countries – including India, Bangladesh, Sri Lanka, Saudi Arabia, United Arab Emirates, Oman, Qatar, Bahrain, Kuwait, Egypt, Jordan, and Lebanon.
Phillips 360 Teams
Our Phillips knowledgeable sales, service, and applications personnel work in small geographically specific Phillips 360 teams to offer our customers a team approach for personalized customer service. Each 360 team has its own Captain, Field Service Leader, and Applications Engineer to provide you with an unrivaled customer experience, beyond the sale of your machine tool.

Phillips Partners to Know
Managing Director

Service Managers

Chetan Jani
Manager – Service
Gujarat, India
+919327606702
cjani@phillipscorp.com

Vijay Patel
Manager – Service
Baroda, India
+919327411501
vpatel@phillipscorp.com

Milind Bane
Manager – Service
Mumbai & Madhya Pradesh, India
+919320833006
mbane@phillipscorp.com

Vikas Kushalapur
Manager – Service
Middle east and North Africa
+971504352412
vkushalapur@phillipscorp.com

Abhinandan Balekundri
Manager – Service
Pune & Aurangabad, India
+918055589144
abalekundri@phillipscorp.com

Shailendra Rathore
Senior Manager – Service
North & East India, India
+919312909810
srathore@phillipscorp.com

Ranindu Danthanarayana
Engineer – Sales & Service
Sri Lanka, Sri Lanka
+94777352710
rdanthanarayana@phillipscorp.com

Jahidul Islam
Engineer – Sales & Service
Bangladesh, Bangladesh
+8801912072918
jislam@phillipscorp.com

Krishan Kumar
Manager – Service
Punjab, India
+919311748105
kkumar@phillipscorp.com

Vikas Sonawane
Manager – Service
Nashik, India
+919372003748
vsonawane@phillipscorp.com

Dheeraj Kumar
Manager – Operations
India
+919310584722
dkumar@phillipscorp.com
Sales & Service Heads

Rupesh Ranjan
Director- Sales
Rranjan@phillipscorp.com

Muralidhara Mynahalli
General Manager – Service
mmuralidhara@phillipscorp.com

Ramkripal Yadav
Vice President – Maharashtra and Madhya Pradesh Region
rbyadav@phillipscorp.com

Haresh Shah
Director – Operations Gujarat Region
hshah@phillipscorp.com

Salil Jain
General Manager- Sales North & East Region
sjain@phillipscorp.com

Nimish Jani
General Manager- Sales Gujarat Region
njani@phillipscorp.com

Ashish Chikhale
General Manager- Sales Federal Region (India, Bangladesh, Srilanka)
achikhale@phillipscorp.com

Jopu Zachariah
Business Manager – Middle East Region
jzachariah@phillipscorp.com

Before you receive your Haas Machine...
Please review the machine dimensions and site requirements and prepare your shop for the machine delivery. Unless prior arrangements were made with your order, you are responsible for rigging the machine off of the truck and putting it into position in your facility. Please see the below link for the specific pre-installation guide for your machine.
When your new Haas machine arrives...
- For all Haas mills size VF-3 or larger, DO NOT PIVOT CONTROL ARM forward due to the delicate wiring inside.
- For all Haas mills size VF-3 or larger, DO NOT PIVOT CONTROL ARM forward due to the delicate wiring inside.
- Remove all cosmolene (rust prohibitent) from the machine table and sheet metal.
- Connect power to the machine. A separate earth-ground wire of the same conductor size as the input power must be connected to the machine's ground lug from the ground supplied from the main plant ground at service entrance and it should be routed in the same conduit as the power to the machine. A local cold-water pipe, ground rod, or Conduit air is NOT acceptable. DO NOT TURN THE POWER ON.
- Connect air to the machine per the specifications. This information is included in the Pre-Installation Guide linked above.
All air and power connections, as well as coolant and tooling, must be furnished before requesting a technician to start up your machine. Once all of this is completed, please contact your respective service scheduler.
- India - 24 x 7 Online Service Support, +917877150150 / service.india@phillipscorp.com
- Middle East and North Africa - Vikas Kushalapur, +971504352412 / vkushalapur@phillipscorp.com
- Bangladesh - Jahidul Islam, +8801912072918 / jislam@phillipscorp.com
- Sri Lanka - Ranindu Danthanarayana, +94777352710 / rdanthanarayana@phillipscorp.com

Once the machine is installed and running....
Haas has several tools available that will help you get started and answer many questions.
You are running your machine,
and you get a 144 alarm...
This alarm notifies the operator 5 days prior to the machine deactivating the control and will require a temporary code to rest or a permanent code to deactivate.
This function of the control allows you to run your machine for 30 days while the paperwork is completed and payment can be verified. Its purpose is to ensure that all parties are paid in full before the complete release of the machine is given.
Once payment has been verified, we will contact you by email and fax with instructions on how to enter your machine’s permanent code. Please keep in mind verification may take several weeks and it may be necessary to issue you a temporary code until Haas releases the permanent code to us. If a temporary code is needed, it will require someone at the control in order for us to generate this code. Please do not ignore the warning as we do not want you to experience any unnecessary down time. Once the permanent code is entered the warnings will stop.
India – Tarannum Gadkari,
+919370915804 / tgadkari@phillipscorp.com
Middle East – Vikas Kushalapur,
+971504352412 / vkushalapur@phillipscorp.com
Bangladesh – Jahidul Islam,
+8801912072918 / jislam@phillipscorp.com
Sri Lanka – Ranindu Danthanarayana,
+94777352710 / rdanthanarayana@phillipscorp.com
Additional Services Provided by Phillips for
Haas Machines

Applications & Training
It takes more than a great machine to get great results. OPTO provides state-of-the-art machining expertise, process engineering support, and on-site training so you can stay ahead of the curve. It’s a fresh pair of eyes. A source for new ideas. An insurance policy against rapidly changing technology and processes. It is a highly skilled personal application engineer, teaming with your team to significantly improve your machining process.

Preventative Maintenance
PPE – Phillips Performance Evaluation
Protect your Haas investment and maximize your productivity by utilizing the locally available Haas Factory-Certified Service Engineers to keep your machine in the best possible condition. The following items indicate the many key points addressed at every maintenance inspection.