Congratulations
for Your New Haas Machine!
Please review all of the below information to ensure a successful start-up of your new machine.
We are dedicated exclusively to Haas machine tools. We have a single focus and mission, and anything we can do to make sure you are completely satisfied with your new machine purchase is well worth our time and effort. Thank you for choosing Haas to fulfill your manufacturing requirements and provide you with customer-focused service and support.
-Terrence Miranda, Managing Director
Below is a little bit about
Life at Phillips
HFO MENA – A Division of Phillips
Phillips 360 Teams
Our Phillips knowledgeable sales, service, and applications personnel work in small geographically specific Phillips 360 teams to offer our customers a team approach for personalized customer service. Each 360 team has its own Captain, Field Service Leader, and Applications Engineer to provide you with an unrivaled customer experience, beyond the sale of your machine tool.
Phillips Partners to Know
Sales Head
General Manager (MENA)
+971 50 467 2411
sale.me@phillipscorp.com/
jzachariah@phillipscorp.com
Sales, Services and Application Managers
Before you receive your Haas Machine...
Please review the machine dimensions and site requirements and prepare your shop for the machine delivery. Unless prior arrangements were made with your order, you are responsible for rigging the machine off of the truck and putting it into position in your facility. Please see the below link for the specific pre-installation guide for your machine.
When your new Haas machine arrives...
- For all Haas mills size VF-3 or larger, DO NOT PIVOT CONTROL ARM forward due to the delicate wiring inside.
- For all Haas mills size VF-3 or larger, DO NOT PIVOT CONTROL ARM forward due to the delicate wiring inside.
- Remove all cosmolene (rust prohibitent) from the machine table and sheet metal.
- Connect power to the machine. A separate earth-ground wire of the same conductor size as the input power must be connected to the machine's ground lug from the ground supplied from the main plant ground at service entrance and it should be routed in the same conduit as the power to the machine. A local cold-water pipe, ground rod, or Conduit air is NOT acceptable. DO NOT TURN THE POWER ON.
- Connect air to the machine per the specifications. This information is included in the Pre-Installation Guide linked above.
All air and power connections, as well as coolant and tooling, must be furnished before requesting a technician to start up your machine. Once all of this is completed, please contact your respective service scheduler.
- Middle East and North Africa - Vikas Kushalapur, +971504352412 / vkushalapur@phillipscorp.com
Once the machine is installed and running....
Haas has several tools available that will help you get started and answer many questions.
You are running your machine,
and you get a 144 alarm...
This alarm notifies the operator 5 days prior to the machine deactivating the control and will require a temporary code to rest or a permanent code to deactivate.
This function of the control allows you to run your machine for 30 days while the paperwork is completed and payment can be verified. Its purpose is to ensure that all parties are paid in full before the complete release of the machine is given.
Once payment has been verified, we will contact you by email and fax with instructions on how to enter your machine’s permanent code. Please keep in mind verification may take several weeks and it may be necessary to issue you a temporary code until Haas releases the permanent code to us. If a temporary code is needed, it will require someone at the control in order for us to generate this code. Please do not ignore the warning as we do not want you to experience any unnecessary down time. Once the permanent code is entered the warnings will stop.
India – Tarannum Gadkari,
+919370915804 / tgadkari@phillipscorp.com
Middle East – Vikas Kushalapur,
+971504352412 / vkushalapur@phillipscorp.com
Bangladesh – Jahidul Islam,
+8801912072918 / jislam@phillipscorp.com
Sri Lanka – Ranindu Danthanarayana,
+94777352710 / rdanthanarayana@phillipscorp.com
Additional Services Provided by Phillips for
Haas Machines
Applications & Training
It takes more than a great machine to get great results. OPTO provides state-of-the-art machining expertise, process engineering support, and on-site training so you can stay ahead of the curve. It’s a fresh pair of eyes. A source for new ideas. An insurance policy against rapidly changing technology and processes. It is a highly skilled personal application engineer, teaming with your team to significantly improve your machining process.
If you have any questions about anything in this packet, please call your local Haas Factory Outlet
